Features
What Tricroma does, format by format, with measurements where we have them.
Picture
- Profile 7 FEL at 12 bits
- Base layer and EL from the same file, decoded in hardware in parallel, paired per frame, composed in Metal following ETSI GS CCM 001 with every frame's RPU. On Mac, Apple TV 4K and iPhone.
- Every Dolby Vision profile
- 4, 5, 7 FEL and MEL, 8.1, 8.4, 10.0, 10.1, 10.4 and 20, including TS and M2TS with BL and EL on two PIDs. "Conversion" for the TV's own Dolby Vision, "HDR10 only" to turn it off.
- Per-scene tone mapping
- BT.2390 driven by L1, the colorist's L2 and L8 trims for your panel, HDR10+ dynamic metadata, a measured per-scene peak for HDR10 and HLG, gamut compressed to P3.
- Display peak
- Estimated from EDR headroom, set from 300 to 4000 nits, or found with test patterns on the movie layer. Per display on Mac.
- Deinterlacing and inverse telecine
- BWDIF in Metal, one frame per field, decided frame by frame. NTSC 3:2 goes back to the original 23.976. The engine decides; there is no setting.
- Black bars
- Measured on 7 keyframes and followed with Dolby Vision L5, so controls and subtitles stay on the picture. Removing the bars leaves variable-ratio IMAX films alone.
- MetalFX on live TV
- 720p and 1080p channels brought to screen resolution. Skipped with HDR, with video already at size, or when the device can't keep up; the Info panel says why.
- Vivid colors
- Experimental, SDR BT.709 only: a 3D LUT in Oklab moves chroma towards P3, with skin protected and brightness unchanged.
- Codecs
- HEVC, H.264, ProRes and AV1 in hardware where available; DNxHR, CineForm, FFV1, JPEG 2000, VC-1, MPEG-2, DivX, WMV, RealVideo and Cinepak in software.
MetalFX was chosen after comparing 237 frames from 59 sources with PSNR, SSIM and VMAF.
How much FEL changes: 14 titles measured
6 points per title, measured by the engine: average difference between profile 7 converted to 8.1 and the 12-bit composition, and share of pixels changing by more than 16 codes.
| Movie | Time | Average (12-bit codes) | Pixels over 16 codes |
|---|---|---|---|
| John Wick: Chapter 3 – Parabellum | 1:14:42 | 54 | 65% |
| John Wick | 0:14:27 | 17 | 32% |
| Obsession | 0:31:03 | 12.5 | 35% |
| Pulp Fiction | 1:50:22 | 6 | 9.5% |
| F9 | 1:04:16 | 7 | 4% |
Across the 14 titles the average change goes from 0.5 to 17 codes. On 3 titles more than a third of the pixels change visibly; on the others the gain is in gradations and fine detail, easier to see on a good HDR display than in an SDR screenshot. In every title the 8.1 conversion produced the same signal as the base layer alone.
Audio
TrueHD Atmos and DTS:X
Objects rendered to 7.1.4: spatial audio on headphones and speakers, lossless 12-channel PCM over HDMI.
Dolby Digital Plus with Atmos
Sent to Apple's decoder with its objects declared, Blu-ray 7.1 included, and named as such in menus and badges.
Night mode
A compressor on PCM lowers loud passages and raises dialogue. On Mac, Apple TV, iPhone and iPad, 12 channels over HDMI included.
Subtitles
- Formats
- SRT, ASS with libass, WebVTT, PGS and VobSub, also as files next to the video or on the server. Font, color and position are chosen once.
- PGS read as text
- Blu-ray subtitles are read with OCR and drawn in your style. Kept as images, they are scaled once to the screen size.
- Automatic sync
- A first correction in about a second, refined while you watch, never while a line is on screen. Remembered per file and track, with Undo and Redo.
- "What did they say?"
- With subtitles off, a jump back turns them on until the point you came from, then off again.
- Audio and Subtitles panel
- Language with the format underneath, «Commentary» and «Audio description» named, other languages grouped, delay and sync at the bottom. Two columns on Mac, iPad and Apple TV, one with a switch on iPhone.
Subtitle edge at 4K: 1.72 px rebuilt, 3.90 px with Lanczos, 3.4–5.9 px before. Sync median error under 0.07 s over 49 episodes.
Library and live TV
- Plex
- Sign-in with plex.tv/link, Continue Watching and progress synced, live updates, ratings, cast, extras, collections, playlists, several servers per account.
- Jellyfin and Emby
- Found on your network, updated live, several addresses per server (home, away, Tailscale) with the one that answers picked automatically.
- Folders and NAS
- SMB, series recognized from file names as in Kodi and Jellyfin,
.nfofiles and artwork next to the files, rescanned when they change. - IPTV
- M3U with an XMLTV grid guide, Xtream Codes with channels, movies and series, catch-up, favorites, zapping, 30 s of rewind that stay after a channel change.
- Tricroma DVR
- On a Mac or a Raspberry Pi: a programme, a series, or the live stream to the end. Conflicts are explained; recordings can be watched while in progress and appear in the library with plot and artwork.
- Downloads
- Movies, episodes and whole series for offline viewing, paused and resumed. Plays made offline reach the server when it is reachable again.
Everyday use
- Player bar
- Margins at 4% of the window width, between 16 and 120 points; title and tracks above the bar; Picture in Picture and AirPlay top left, volume on the right, as in Apple's TV app.
- iPhone Duo
- Closed, open or half-open: Home with a vertical tab bar, Settings side by side, a player that keeps its place when the layout changes.
- iPad
- Sidebar with pinnable sources; in Split View, Slide Over and narrow windows the iPhone tabs, keeping the open page.
- Resume
- From the exact point, with the audio and subtitles you chose last time. Marked watched from the start of the end credits or at 90%.
- End credits
- Recognized in the picture with Vision when the server doesn't mark them, so the next episode appears as they start. Skip intro, "Are you still watching?", sleep timer.
- Network speed
- While loading you see how long is left; if the network is too slow for the movie, both speeds are shown: «Network 30 Mbit/s · movie 77 Mbit/s».
- Info panel
- The chain step by step, and performance every second: frames, GPU per frame, bitrate, memory, CPU, temperature.
- Settings
- The same options, order and words on Mac, iPhone, iPad and Apple TV, each with a line saying what it does.
- Light and dark
- The library follows the system; the player stays dark. Increase Contrast is respected in both.
- Music
- FLAC, DSD, WavPack, APE and other formats, gapless, lyrics that follow the song syllable by syllable, queue, AirPods and Control Center.
- Mac
- "Open With" from the Finder, one window per file, Finder thumbnails for MKV and TS made by the engine.
- Apple TV
- Top Shelf with featured titles, your iPhone as a remote showing what's on air, zapping with the remote.
Specifications
- Containers
- MKV, MP4, MOV, TS, M2TS, WebM, AVI, FLV, VOB, HLS VOD and live, HTTP
- Dolby Vision
- 4, 5, 7 FEL and MEL, 8.1, 8.4, 10.0, 10.1, 10.4, 20
- HDR
- HDR10, HDR10+, HLG; BT.2390 tone mapping with L1, L2, L8
- Audio
- TrueHD Atmos and DTS:X as 7.1.4, E-AC-3 with Atmos, AC-3, DTS, AAC, FLAC, Opus, PCM
- Subtitles
- SRT, ASS, WebVTT, PGS, VobSub, external and from servers
- Sources
- Plex, Jellyfin, Emby, M3U with XMLTV, Xtream Codes, SMB, folders, files
- Systems
- macOS 26, tvOS 26, iOS and iPadOS 26
- Languages
- English, Italian
- Not supported
- Transcoding, DRM, HDMI bitstream passthrough (not available to apps), 3D MVC
Questions
Why not Infuse, Neptune or Native Player?
On profile 7 FEL, which is what most UHD Blu-ray remuxes are, none of the three applies the enhancement layer's residual; Tricroma composes it. Then Atmos and DTS:X in 7.1.4, IPTV in the same app, and per-scene tone mapping with the L2 and L8 trims.
Does FEL make a visible difference?
On many titles it's small, because the base layer is already close to the master. On others highlights, skin tones, gradients and shadows change. The comparison frames on the home page are the strongest cases found by measuring 14 titles. If your library is mostly WEB-DLs, this part won't matter much.
Is it mpv, IINA or VLC with a different interface?
No. FFmpeg reads the containers; everything after that is written for Tricroma: dual-layer decoding, the Dolby Vision composer, the tone mapper, the Atmos object path, the subtitle renderer and the A/V clock.
Does it transcode?
No. It plays directly from Plex, Jellyfin, Emby, a NAS folder or a stream URL.
What about privacy?
There is no Tricroma account and the app sends no usage statistics. Server tokens and passwords stay in your Keychain. Privacy policy.